ADSc Series — Surge Protection Devices

DynaShield® ADSc Surge Suppression

ALLTEC’s fully-featured ADSc models are high-performance surge protectors designed specifically for critical panel locations. The ADSc incorporates high-energy MOVs with the best performing EMI filter on the market to protect against transients originating from induced lightning strikes, utility switching, and facility power noise.

LED fault indicators for each phase provide real-time diagnostics. Options include alarm with red LED and dual Form C dry contacts for remote indication and an audible alarm. The ADSc Series is available for all voltages and configurations up to 600V. Housed in a rugged NEMA 12 enclosure, these devices are suitable for indoor applications.

  • 10 modes of protection
  • 200 kAIC fault current rating
  • Advanced EMI/RFI noise filtering (-45 dB) 3 kHz to 1 MHz
  • Optional 30 amp fuse allows direct connect to power bus
  • Resettable surge counter option
  • Listed to UL 1449 4th edition
  • 10-year standard warranty
Shop Now

DynaShield Applications

The second tier of protection diminishes the significance of random high-energy, short-duration electrical power transients through properly installed surge protective devices. These occurrences are typically caused by atmospheric phenomena (such as lightning strikes), utility switching, inductive loads, and internally generated overvoltages. You can view typical installation locations in the application maps to the right by locating the numbers 5 and 6.

Model ADSc-080 ADSc-100 ADSc-200
Connection Type Parallel Connected
Agency Listings Listed to UL 1449 4th Edition and UL 1283
Protection Modes Line-to-neutral, Line-to-ground, Line-to-line, Neutral-to-ground
Operating Frequency Range 50–60 Hz
Maximum Surge Current 160 kA per phase 200 kA per phase 400 kA per phase
Response Time < 1 ns
Status Indication Green LED
Enclosure Protection Level NEMA 12, Painted Steel
Dimensions (H x W X D) 10″ x 8″ x 6″ (Optional 15.5” x 12” x 6.2”)
Weight (Maximum) Up to 25 lbs
Wire Connections Standard #10 AWG
Operating Temperature -40° F to +149° F (-40° C to +65° C)
Operating Humidity 5% to 95% non-condensing

Contact us to find out what risk mitigation products & services work best for your industry.

Contact Us
Contact Us